Quadro SW-Version 4.1.x Instalační příručka stáhnout pdf (Strana 31)

QuadroISDN Manual II: Administrator's Guide Administrator’s Menus

QuadroISDN; SW Version 4.1.x 31

Fig. II-54: Extensions Management page

The following columns are present in the table:

• Extension - lists the 2-digit user or attendant extensions on the Quadro. This number is used for internal PBX calls.

• Display Name - indicates an optional display name to identify the caller.

• SIP Address - displays the SIP address of the corresponding extension. The column displays the full SIP address, (i.e.,

username@sipserver:port) when the Registration on SIP Server checkbox is selected. If registration is disabled, the SIP address will be

displayed in the following format: “username, Proxy: sipserver:port”. If no SIP registration server or SIP server port is defined, corresponding

information will not be included in this column. If no username is defined, the extension number will be displayed instead.

• Percentage of System Memory - indicates the user space (in percentages) configured for each extension. For user extensions, the actual

available duration (in minutes) for the blocking messages is displayed here. For attendant extensions, the actual available duration (in

minutes) for the auto attendant messages is displayed here.

• Call Relay - indicates whether or not the Call Relay option is enabled on the extension.

• Codecs – column lists the short information (full information is seen in the tool tip) about extension specific voice Codecs. Extension

codec’s can be accessed and modified by clicking on the link of the corresponding extension’s Codecs. The link leads to the

Extension

Codecs

page.

Clicking on each user extension in the Extensions table will open the extension specific Extension Settings menu. When Call Park service is

enabled on the extension, it is displayed without a link in the Extensions Management table and extension pages. Additionally, the supplementary

services configuration pages will not be accessible.

Add opens the Add Entry page where the type and number of the new extension should be defined. This page consists of the following

components:

The Extension text field is used to enter a new extension

number. The extension number is a two-digit number. If non-

digit symbols have been entered, the error “Incorrect

Extension: no symbol characters allowed” will appear. If the

extension length is shorter than 2 digits, the error “Incorrect

Extensions length” will prevent the creation of the extension. If

an extension with the same number already exists in the

Extensions Management table, the error “Extension already

exists” will appear.

Please Note: Each extension number cannot start with digits

0, 8 or 9.

The Type drop down list is used to select the type of the

extension (user or attendant) to be created (for details see

below).

Fig. II-55: Extensions Management - Add Entry page

Edit opens the Edit Entry page where a newly created user or attendant extension settings might be adjusted. To operate with Edit, one or more

record(s) have to be selected, otherwise the “No records selected” error message will appear.

The Edit Entry page consists of two frames. In the left frame settings groups are listed. Clicking on the corresponding settings group displays their

configuration options in the right frame.

Please Note: Save changes before moving among settings groups.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 105 106

Komentáře k této Příručce

Žádné komentáře

Quadro SW-Version 4.1.x Instalační příručka Strana 31

Komentáře k této Příručce

Související produkty a manuály pro Systémy pobočkových ústředen (PBX) Quadro SW-Version 4.1.x