Quadro Quadro4x Instalační příručka stáhnout pdf (Strana 20)

QuadroE1/T1 Manual-I: Installation Guide Configuring the QuadroE1/T1

Please Note: you must confirm the settings within 20 minutes. If not, the device will revert

back to the previous configuration and reboot.

Please Note: If you do not use DHCP for your LAN and you have changed your LAN set-

tings, make sure that the IP address of the PC connected to QuadroE1/T1 is still within the

specified IP address range. Otherwise, your PC might be unable to establish a connection to

QuadroE1/T1.

If you changed the network configuration of the LAN, you may have to reboot your PC to get

a new IP address from the new network. You can then access the Web Management of the

QuadroE1/T1 on the new IP address you assigned to the QuadroE1/T1.

Your QuadroE1/T1 is now configured. If your QuadroE1/T1 has direct connectivity to the

Internet, you may verify the functionality of IP calls now:

• Dial 899# and you will hear a voice message that confirms you successfully es-

tablished an IP call. If this call is not successful, go to Appendix: Checking the

Connections

for troubleshooting tips.)

To enable PSTN calls, you continue to the second step of the configuration of QuadroE1/T1

and specify the E1IT1 Settings.

QuadroE1/T1; (SW Version 2.4.x) 19

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 40 41

Žádné komentáře

Quadro Quadro4x Instalační příručka Strana 20