Quadro Quadro2x2 Instalační příručka stáhnout pdf (Strana 14)

QuadroM 32x/8L/26x/12Li/26xi Manual I: Installation Guide Step 1: Installing the Quadro

LAN/WAN Connection Options

• A QuadroM32x IP PBX with an Ethernet WAN port behind a router, which is con-

nected to a cable or xDSL modem. IP phones are placed on the WAN side of the

QuadroM32x.

Fig. I-7: Configuration: QuadroM32x behind a router with IP phones on WAN

• A QuadroM 8L/26x IP PBX with an Ethernet WAN port behind a router, which is

connected to a cable or xDSL modem. IP phones are placed on the WAN side of

the QuadroM 8L/26x.

Fig. I-8: Configuration: QuadroM 8L/26x behind a router with IP phones on WAN

In this and the following configuration, the IP router typically acts as a DHCP server for the

LAN and assigns the IP addresses to the PCs and other devices. The Quadro can be con-

nected through its WAN port directly to one of the router's LAN ports and will get an IP ad-

dress from the router. By default, the Quadro acts as a DHCP client on the WAN port. The

IP phones are placed on the WAN side of the QuadroM 8L/26x, connected to the company

LAN.

The Admin PC can be connected to the Quadro LAN or WAN port to access the Web Man-

agement of the Quadro.

Please note: Since Quadro uses STUN by default, it will work with most basic routers

without any further configuration.

QuadroM 32x/8L/26x/12Li/26xi; (SW Version 5.2.x) 14

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 75 76

Žádné komentáře

Quadro Quadro2x2 Instalační příručka Strana 14